PRODUCT HIGHLIGHTS
- Automatic shut-off: The AquaGuard actuator close your water valve automatically anytime a leak is detected on any of the connected Water Sensors
- 0.5" - 1.25" ball valves only: please check your water valve for compatibility first
- Check your valve first: you'll need 3" clearance to each side from the center of the valve, 1" clearance between the pipe and the wall, and at least 1.25" clearance between the valve handle and the pipe.
- Works offline: a wired leak sensor probe is included to shut your water off even offline.
- Indoor / outdoor: IP66 water resistance. Install the actuator outdoors if this is where your water main is.
- Back-up battery (sold separately): add extra peace of mind with a smart power pack for the AquaGuard (buy here). The AquaGuard automatically shuts down right before the battery is fully drained, thanks to its smart auto shut-off feature.
- Tool-free DIY installation: you'll be done in less than 5 minutes! Remember to install and calibrate the valve before testing it.
- Extremely powerful: the AquaGuard auto-calibrates and tackles even the most stubborn valves
- 24/7 Notifications: instant phone calls, in-app alerts, text messages, and emails to make sure you’re always notified when a leak is detected.
- 1-year warranty and lifetime tech support
SPECIFICATIONS
- Valve Requirements: 0.5" - 1.25" ball valves only
- Installation Requirements: 3" clearance from the valve center to each side on the pipe, at least 1.25" clearance between the valve handle and the pipe, at least 1" clearance between the pipe and the wall.
- Water Leak Probe Length: 4.75 feet
- Power: 12 V DC (1 A) power supply (included)
- Power Cord Length: 9.5 feet
- Temperature Sensor Range: -40° – 257° F
- Sound Indicator: up to 85 dB
- Wireless Range: Up to 400 feet line of sight (up to 130 feet indoors)
- Operating Temperature: 14° – 122° F
- Dimensions: 5.5" long x 2.25" wide x 5" tall
- Installation: Indoor or outdoor use (IP66)
1 Year Warranty and Lifetime Tech Support